As we mentioned before OxygenOS 3.0 community build based on latest Android 6.0.1 Marshmallow is now available for OnePlus 2.If you haven’t updated your OnePlus 2 to latest OxygenOs 3.0 Beta Android 6.0.1 Marshmallow then follow our previous guide > Download & Install OxygenOS 3.0 Beta On OnePlus 2.
Follow our guide below to download Modified TWRP recovery for Oxygen OS 3.0 Beta and install it yourself.
View my Flipboard Magazine.
÷ Prerequisites:
• This only for OnePlus 2
•Make sure that your device is updated to OxygenOS 3.0 Beta.
Guide > Download & Install OxygenOS 3.0 Beta On OnePlus 2
•Your device should have an unlocked bootloader
•Make sure your device has more than 50% battery.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install Modified TWRP recovery for OnePlus 2 Oxygen OS 3.0 Beta :
1- Download Modified TWRP recovery for Oxygen OS 3.0 Beta.
2- Setup ADB and Fastboot on your PC.
3- Enable USB debugging on your device:Open Settings on your device.
4- Go to About phone and tap seven times on Build number, this will enableDeveloper options.
5- Now go back to Settings and you’ll see “Developer options” there, open it.Tick the USB Debugging checkbox.
6- Open the folder where your TWRP Recovery .img file is saved.
7- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8- Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:adb reboot bootloader
└ If your asks for permission to “Allow USB debugging”, tap OK.
9- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file: fastboot flash recovery twrp-2.8.x.x-xxx.img
└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.imgand use the command above.
10- Once TWRP is successfully flashed on your device, issue the following command to reboot:fastboot reboot
Done!!! Now you have TWRP on your device
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More OnePlus 2 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
÷ Prerequisites:
• This only for OnePlus 2
•Make sure that your device is updated to OxygenOS 3.0 Beta.
Guide > Download & Install OxygenOS 3.0 Beta On OnePlus 2
•Your device should have an unlocked bootloader
•Make sure your device has more than 50% battery.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install Modified TWRP recovery for OnePlus 2 Oxygen OS 3.0 Beta :
1- Download Modified TWRP recovery for Oxygen OS 3.0 Beta.
2- Setup ADB and Fastboot on your PC.
3- Enable USB debugging on your device:Open Settings on your device.
4- Go to About phone and tap seven times on Build number, this will enableDeveloper options.
5- Now go back to Settings and you’ll see “Developer options” there, open it.Tick the USB Debugging checkbox.
6- Open the folder where your TWRP Recovery .img file is saved.
7- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8- Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:adb reboot bootloader
└ If your asks for permission to “Allow USB debugging”, tap OK.
9- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file: fastboot flash recovery twrp-2.8.x.x-xxx.img
└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.imgand use the command above.
10- Once TWRP is successfully flashed on your device, issue the following command to reboot:fastboot reboot
Done!!! Now you have TWRP on your device
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More OnePlus 2 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
Download Your Favorite Mod Full Android Application And Games For Free In Here.Thanks for coming to this site and If you like our post please share and like this page to your friends. Any question please tell us in the comment section.