TWRP Touch Recovery for your Samsung Galaxy A5 (2016) will allow you to install custom ROMs, advanced options like formatting the system partition, making backups etc....
The entire tutorial has been given below for those who want to install this custom recovery on their phones.
View my Flipboard Magazine.
÷ Prerequisites:
•This TWRP 3.0.0 recovery installation tutorial is only for Galaxy A5 (2016) . Please do not try on any other Galaxy A5 (2016) variants.
•Make sure you backup all your data in your phone before proceeding as a precaution.This TWRP 3.0.0 Recovery tutorial works with Android 5.0.2 and all future Android updates.
•Go to Settings > About device on your Galaxy A5 (2016) and check your model no. It should be or do notproceed.
•Samsung Galaxy A5 (2016) Variants supported:
A510F
A510FD
A510Y
A510M.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install TWRP 3.0 Recovery On Samsung Galaxy A5 (2016) :
Step 1 – Download TWRP 3.0.0 Recovery package for Samsung Galaxy A5 (2016) and extract this file anywhere in your computer:
NOTE: Make sure you select the appropriate file above for your Galaxy A5 (2016) model.
Step 2 – Download ODIN v3.09 which will help you to install CWM Recovery on Samsung Galaxy A5 (2016) .
Step 3 – Switch OFF your phone. Now go toDownload Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy A5 (2016) USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ / ‘AP’ and select the CWM package file you downloaded in step 1 for your phone.
Step 8 – In ODIN, uncheck the Auto Rebootand check F. Reset Time options, if not already.
Step 9 – Now click on the Start button inODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, you should hold your Power Button, Volume Button and Home Button until the screen turns black.
Step 11 – Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP 3.0 custom recovery interface.
Step 12 – You can now reboot your phone by touching the reboot option in TWRP.
That’s it! Your Samsung Galaxy A5 (2016) has now been flashed with TWRP 3.0.0. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy A5 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
÷ Prerequisites:
•This TWRP 3.0.0 recovery installation tutorial is only for Galaxy A5 (2016) . Please do not try on any other Galaxy A5 (2016) variants.
•Make sure you backup all your data in your phone before proceeding as a precaution.This TWRP 3.0.0 Recovery tutorial works with Android 5.0.2 and all future Android updates.
•Go to Settings > About device on your Galaxy A5 (2016) and check your model no. It should be or do notproceed.
•Samsung Galaxy A5 (2016) Variants supported:
A510F
A510FD
A510Y
A510M.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install TWRP 3.0 Recovery On Samsung Galaxy A5 (2016) :
Step 1 – Download TWRP 3.0.0 Recovery package for Samsung Galaxy A5 (2016) and extract this file anywhere in your computer:
NOTE: Make sure you select the appropriate file above for your Galaxy A5 (2016) model.
Step 2 – Download ODIN v3.09 which will help you to install CWM Recovery on Samsung Galaxy A5 (2016) .
Step 3 – Switch OFF your phone. Now go toDownload Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy A5 (2016) USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ / ‘AP’ and select the CWM package file you downloaded in step 1 for your phone.
Step 8 – In ODIN, uncheck the Auto Rebootand check F. Reset Time options, if not already.
Step 9 – Now click on the Start button inODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, you should hold your Power Button, Volume Button and Home Button until the screen turns black.
Step 11 – Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP 3.0 custom recovery interface.
Step 12 – You can now reboot your phone by touching the reboot option in TWRP.
That’s it! Your Samsung Galaxy A5 (2016) has now been flashed with TWRP 3.0.0. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy A5 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
Download Your Favorite Mod Full Android Application And Games For Free In Here.Thanks for coming to this site and If you like our post please share and like this page to your friends. Any question please tell us in the comment section.