How to Root Samsung Galaxy S6( All Variants) on Android 5.1.1 Official Firmware.





Now you can root your Samsung Galaxy S6 easily but Make sure you backup all your data in your phone before proceeding as a precaution.


÷ Prerequisites:

•This root method works with Android 5.1.1 firmwares and all future Android updates as well.

•Your Galaxy S6 should be on an officialfirmware by Samsung, not a custom ROM.


View my Flipboard Magazine.

 *Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.



÷ How to Root Samsung Galaxy S6( All Variants) on Android 5.1.1 Official Firmware:

Step 1 – Download UniKernel Package for Samsung Galaxy S6 to your computer and place the file on your desktop. This package supports the following Samsung Galaxy S6 variants:

Samsung Galaxy S6 G920F
Samsung Galaxy S6 G920I
Samsung Galaxy S6 G920S
Samsung Galaxy S6 G920K
Samsung Galaxy S6 G920L
Samsung Galaxy S6 G920T
Samsung Galaxy S6 G920W8

Step 2 – Download ODIN v3.09 which will help you to root Android 5.1.1 on Samsung Samsung Galaxy S6.

Step 3 – Switch OFF your phone. Now press and hold the Volume Down + Home buttons together, and then press the Power button till you see a warning screen (as shown below). Press Volume Up to confirm and proceed to the Download Mode.

Step 4 – Make sure you have your Samsung Galaxy S6 USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.



Step 7 – Now select the file that you have to flash/install on your phone. This file will be found on the desktop like mentioned in Step 1.

Click on ‘PDA’ or ‘AP’ and select the file.

Step 8 – In ODIN, check the Auto Reboot andF. Reset Time options, if not already.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 – After you see the home screen, unplug your phone from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again


OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 – Pull out the battery to turn OFF the phone forcefully.

Step 12 – Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy S6 has now been rooted on Android 5.1.1 official software update. Check for the SuperSU app in your apps list to verify.



Previous
Next Post »